Introduction: DIY Jewelry Hanger

Picture of DIY Jewelry Hanger

DIY jewelry hanger made by all recycled & found materials.

Step 1: Step 1

Picture of Step 1

I used a piece of compressed wood wraped some old wallpaper I had. I used scraps of wood & hot-glued them to the wraped board. I nailed 2 inch nails to the bottom of the scaps to function as hangers.

Step 2: Step 2

Picture of Step 2

I used a staple gun to fasten a Coke tap to the back of it to hang on the wall.

Step 3: Step 3

Picture of Step 3

The final product.

Comments

glitteringsky (author)2012-06-22

Really beautiful.

I am in the shed! (author)2012-03-30

A really nice idea, I thought of using small brass hooks instead of nails - I found some about 1/2" long inside an old cupboard in a skip (dumpster?)
The wood scraps are very effective. Well done!

Thanks so much. It only took about 30 mins to build & it's really helped me organize all of my jewelry. Before this I had no system of organization so it's helped tremendously.

About This Instructable

1,727views

9favorites

License:

More by dvnlilly:DIY Jewelry HangerZucchini Hash Browns
Add instructable to: