Print PDF
Favorite
Email
Step 5Quick dry run and coil end shaping.
Alright, it's time to start making this thing look like a jockey box.
Set the coil in the cooler, and bend the tubing around to fit the inlet and to a convenient place to attach the vinyl tubing from the tap.
When you bend the copper tubing this time, use something like a hairspray can for the form. Otherwise, you really, really, really need to be careful, as you're probably going to be making tighter bends that before.
Set the coil in the cooler, and bend the tubing around to fit the inlet and to a convenient place to attach the vinyl tubing from the tap.
When you bend the copper tubing this time, use something like a hairspray can for the form. Otherwise, you really, really, really need to be careful, as you're probably going to be making tighter bends that before.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
