Instructables

DIY Kitty Crack: ultra-potent catnip extract

Featured

Step 5: Start distilling

Heat the pot up until the water starts boiling. Did I mention that you might want to do this outside? The catnip vapors don't smell bad, in fact it's a pleasant minty smell, but it's pretty strong and is likely to linger for a while. At least open up all the doors and windows.

Once the steam starts to condense on the lid, cover it with some of the ice. This will help condense the vapors more efficiently. To put some hard numbers on it, my distiller was able to condense ~10 mL in 15 min when I had the lid just cooled by air. But with ice on top, it condensed ~100 mL in 15 min.

The ice will melt as the steam condenses, hopefully collecting in the glass in the center of the pot. This is good.
 
Remove these adsRemove these ads by Signing Up
w0ot!4 years ago
Are you suggesting we put a couple hand-fulls of frozen water on top of a GLASS lid that is really, really hot? I'm thinking I should use an expendable glass lid...
justan7 years ago
i found twas easier, instead of pouring off melted ice, just to use a sponge. [totally enjoyed this btw]
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!