DIY LED Plexiglass Heart

Step 2 Gather your parts

There's not really many things you need for this project. A sheet of Plexiglas at least 5x4 inches and at least1/8 inch thick (but thinner is acceptable). LEDs, any color you want, and as many as you want, but it depends on the length of your etching. Power supply, (mine came from an old router that we accidentally bricked), Dremel with 3/32 inch engraving bit, 1x2inch, and 1x3inch pieces of wood (whatever type of wood you like), and the usual hot glue, and solder.