With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
This is a simple Lego iPod dock that you can build in a single afternoon. It is very simple to make. Oh, and by the way this is my first instructabl...
1. 1 16x8 plate 2. 4 8x2s 3. 8 3x2s 4. 12 2x2s 5. 8 6x2s 6. 5 4x2s 7. 2 1x2s 8. 2 1x4s 9. 2 1x6s 10. 2 1x1s
Stack 4 2x6s on top of each other, and place on board as shown. Build two walls around the piece that you just made as shown.
Build the wall as shown in the pictures
stack the 2x2 pieces on top of each other as shown. Then place a 2x2, and a 1x1 on top of them as shown.
Put the USB charger across the two Lego pieces as shown. Then secure the cord down with Lego pieces.
Finish covering the back wall with Lego's as shown.
Build the corners around the USB plug as shown.
Plug in your iPod and your done!
These steps are optional they are just for decoration.
1. 6 clear 1x1 slanted pieces 2. 6 1x2s
Put it all together as shown.
So NOW you can plug your iPod in, and enjoy!
Enjoy your new iPod dock!
Remove these ads by
Signing Up
Not NiceInappropriateSpam3,430 views
11 favorites
Posted:
Feb 18, 2012
License:
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »