With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
This is a simple Lego iPod dock that you can build in a single afternoon. It is very simple to make. Oh, and by the way this is ...
1. 1 16x8 plate 2. 4 8x2s 3. 8 3x2s 4. 12 2x2s 5. 8 6x2s 6. 5 4x2s 7. 2 1x2s 8. 2 1x4s 9. 2 1x6s ...
Stack 4 2x6s on top of each other, and place on board as shown. Build two walls around the piece that you just made as shown.
Build the wall as shown in the pictures
stack the 2x2 pieces on top of each other as shown. Then place a 2x2, and a 1x1 on top of them as shown.
Put the USB charger across the two Lego pieces as shown. Then secure the cord down with Lego pieces.
Finish covering the back wall with Lego's as shown.
Build the corners around the USB plug as shown.
Plug in your iPod and your done!
These steps are optional they are just for decoration.
1. 6 clear 1x1 slanted pieces 2. 6 1x2s
Put it all together as shown.
So NOW you can plug your iPod in, and enjoy!
Enjoy your new iPod dock!
Lego iPod Touch Dock!by digicaleb
LEGO iPod nano Docking Stationby Radioactive_Legos
KTZ Project: DIY iPod nano Dockby zepin8789
DIY iPod dockby syzer
iPod Throne, a lego dockby Senator Penguin
Join 2 million + to receive instant DIY inspiration in your inbox.
Download our apps!
© 2016 Autodesk, Inc.