Introduction: DIY Magic Wands

So I decided I would make some magic wands! It was so much fun. I did a few that I show in the video if you want to check them out. Just a few ideas! You can make so many other cool looking wands! =D Please go check out my youtube page youtube.com/msmaomaoz and subscribe.

Step 1: Things I Used

Picture of Things I Used

Hot glue

Paint

Beads

Glitter

sticks

Step 2: First

Picture of First

So the first thing I did was I took a big bead and glued it to the top of my stick, this is going to act as the top of the wand.

Step 3: SO MUCH GLUE

Picture of SO MUCH GLUE

So I took my hot glue gun and I covered the big bead with a lot of glue, I made a swirl on the top of mine.

Step 4: Bead Details

Picture of Bead Details

I took some pretty beads and I put it all around the base of the big bead, going back and fourth from white to purple.

Step 5: More Details

Picture of More Details

After I just took more glue and added a swirl going down the stick.

Step 6: Handle

Picture of Handle

I took even more glue and put a ton on the bottom for the handle.

Step 7: Painting

Picture of Painting

I painted the top white, I made sure to sprinkle the glitter on top when the paint was still wet.

Step 8: Purple

Picture of Purple

I made the base of the stick purple.

Step 9: Handle

Picture of Handle

I painted the handle white. And that is it. I did a few that I show in the video if you want to check them out. Just a few ideas! You can make so many other cool looking wands! =D

Comments

About This Instructable

521views

6favorites

License:

Bio: Find me on YouTube.com/msmaomaoz and facebook.com/msmaomaoz.
More by MsMaoMaoz:Gamora MakeupMermaid Scales Potion Gone Wrong
Add instructable to: