Introduction: DIY Message Board
This project is quick, easy, and cute for your room.
Step 1: Supplies
Here's what you'll need.
Old bulletin board
Quilter's batting (This is not really necessary, it just makes it look a little better.)
Thumbtacks (Decorative or flat work best.)
Hot glue gun
Step 2: Batting
You may want to take off the wooden edges, but this is optional. First, cover the top surface of the board with the batting.
Step 3: Fabric
Cut a piece of fabric that has an extra 2 inches on all sides and lay it over the batting. Carefully flip over the board and glue the fabric up on the edge.
Step 4: Ribbon
Lay ribbon strips across the board and glue them in place on the other side of the board. Wherever the ribbon intersects, push a tack into place.
Step 5: :)
Finished! Hope you enjoyed it! Like and have fun!