With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
I love my house. It's a classic New Orleans shotgun. Over 100 years old, it was made by craftsmen who really knew how to build things to last. There w...
Tools you will need: • Pry-bar. • Shop Knife • Measuring tools -Tape Measure, Steel Square, etc. • Circular Saw with blade for cutting plywood. • Ham...
First thing you will need to do is move everything out of the room. This project takes some time, you can't do it in a day. You need to allow for dryi...
There will be lot's of dust and debis left over from tearing up the carpet. You will need to sweep and vacuum it up. The carpet pad that was glued on ...
Apply the Kilz sealant to the subfloor. The Kilz will help protect the subfloor and help seal in any odors that have made it on to the subfloor.
We started in the closet s a test. If you need to cut the plywood to fit the space, place the edges you cut towards the edge of the wall as the cuts y...
The gap where the doorway is between the rooms is tricky. The floors between the rooms may not be level or made out of the same material and the gap w...
To seal the floors follow the directions on the polyurethane. I purchased an applicator so I could do it faster - definitely recommended. We used fou...
Now that the floor is down, you can add any trim molding that is needed. I used 1/4 round shoe molding. This filled the gap between the rest of the m...
After the floors dry and the molding put on and painted (if needed) you can bring your stuff back in and your done.
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »