Introduction: DIY PVC Single Guitar Stand

Heavy duty guitar stand, will not tip and hugs guitar, made with 3/4 PVC.

Comments

author
luinks made it! (author)2016-03-11

rough build,i'll make another with 3/4 sch 80 if i can find some at home depot,just eyeballed the measurements, inserted a couple of metal rodsto compensate the thinness and wobbleing, thanks for the idea

índice.jpgJ9IwztMH.jpg
author
OtterTraxx (author)2012-10-08

6 "T's", 6 "elbows", 8 "end caps", maybe 4 "no-slip-grips", and some pipe foam.
Black Krylon "Fusion" spray paint (or just use black PVC pipe (which, IMHO, is not as easy to work with...), and PVC cement.

That's what I see.

author
juliodvh (author)2012-01-08

This looks like a very strudy stand, but where is the material list? To bad, looks great.

About This Instructable

13,900views

50favorites

License:

More by stratomaster:DIY PVC Single Guitar Stand
Add instructable to: