DIY Pan & Tilt Security Camera

Step 3 Making the dome

Next I had to hack the security dome to hold everything we need for the project. I had to drill a hole in the top to feed the battery cables for the servo receiver. The nanny cam has the option to have a 9v battery to run it but since the receiver for the servo's needed to have the on/off switch and the battery cable lead run up to the bedroom I just decided t make it all together and tape it in all one cable along the roof. One step I did not take a picture of is the part where I had to splice the cables together another 25ft long needed to run everything up to the bedroom.