DIY Pan & Tilt Security Camera

Step 4 Installing servo's

After dissasembling the security dome, the inside top is where we will glue the servo too. Make sure when this is done it is in a spot where it will have clearance when the actual dome goes back on! This set-up is very tiny and that is why we use micro servo's and micro spy cams. After it looks good and all glued down turn on the transmitter and test it out to see how it all works. Nothing worse than getting it all installed and having something go wrong and have to tear it all down for repairs! Trust me that sucks! You should have a fine tune on the transmitter to tune the channel (servo) into the center position, You want everything even and the cam to look in both directions equally so make sure you set your servo's accordingly before actually fastening them down.