Picture of DIY Peg Mini-Gun
Make a very simple mini-gun from a regular clothes-peg. You can do it in few minutes. The gun is quite powerful and can shoot up to 5 meters. Be careful and don't shoot into living creatures.

Remove these adsRemove these ads by Signing Up

Step 1: What you need

Picture of What you need
- clothes-peg
- knife
- file (not necessary)
- thread
- toothpick (as a bullet)

Step 2: Disassambling the peg

Picture of Disassambling the peg
033 - Super Peg Mini-Gun - 03.jpg
033 - Super Peg Mini-Gun - 04.jpg
033 - Super Peg Mini-Gun - 06.jpg
Disassemble a peg and cut with a knife red parts as shown on the pictures.

Step 3: Cutting a gunpoint

Picture of Cutting a gunpoint
033 - Super Peg Mini-Gun - 11.jpg
033 - Super Peg Mini-Gun - 12.jpg
033 - Super Peg Mini-Gun - 13.jpg
With a file make two furrows in the peg parts. They will create a gunpoint.

Step 4: Assembling the gun

Picture of Assembling the gun
Join two parts of a peg with a thread (or any rope or tape) and insert spring as shown on a picture.

Step 5: Ready to shoot

Picture of Ready to shoot
033 - Super Peg Mini-Gun - 17.jpg
033 - Super Peg Mini-Gun - 18.jpg
033 - Super Peg Mini-Gun - 21.jpg
Cock a gun as shown, insert a toothpick and you are ready to shoot.
I found that if you extend the peg by cutting it a little longer you a slight bit more of power and range. due to the fact that your trigger (spring) has a little bit more time to speed up propelling your projectiles (tooth pick or matchs). you can always try this and experiment with it
Spycrab5 years ago
wow1 i'm going to see if i have any clothes pegs lying around...:-D
jimtran937 years ago
nice MiniGun XD i like the warning :D