Print PDF
Favorite
Email
Step 6Seal
Fold back the flap that you just made and turn on your heat-sealer.
Place the edge of your protector on the heat sealer so that the edge of the heat sealer lines up to the crease that you just made (see pictures).
Seal for three seconds (or as necessary. I recommend doing test seals.)
If you are using a soldering iron, sandwich the protector between the waxy side of two sheets of wax paper. Trace the edge of the protector from the crease that you folded to the bottom crease using the soldering iron. This may take some testing before you get it right.
Place the edge of your protector on the heat sealer so that the edge of the heat sealer lines up to the crease that you just made (see pictures).
Seal for three seconds (or as necessary. I recommend doing test seals.)
If you are using a soldering iron, sandwich the protector between the waxy side of two sheets of wax paper. Trace the edge of the protector from the crease that you folded to the bottom crease using the soldering iron. This may take some testing before you get it right.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
