Print PDF
Favorite
Email
Step 5Powering the ethernet jack
Take one of the striped ends of your ac adapter. You will notice that one of the wires will have a white stripe or writing on it. Lets take the marked (striped) wire and push it into slot #8 of the ethernet jack. Take the non-marked wire and push it into slot #4. Take the other striped piece from your ac adapter and do the same to the other ethernet jack.
You should now have 2 parts. One will have the AC adapter power block connected. The other will have the AC power plug connected. ( as pictured). Use electrical tape to secure the AC wire to the ethernet cable. This will help to relieve the strain on the AC wires.
You should now have 2 parts. One will have the AC adapter power block connected. The other will have the AC power plug connected. ( as pictured). Use electrical tape to secure the AC wire to the ethernet cable. This will help to relieve the strain on the AC wires.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
