With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
share what you made with text, photos, video, and files
gather your favorite instructables together
The DIY Radio is designed to be produced and sold as a flat-pack unit, consisting of three parts. An electronics module, the main body, and a cover. A...
This step simply requires you to carefully unscrew all the screws in the outer shell and within the battery casing of the radio. Take care when pullin...
Hacking the radio chip requires extending the wiring of the components. Firstly, de-solder the 6 connection points for the tuner. Solder some 120mm wi...
This is the template for the radio. It is best to cut it out on a laser cutter to achieve the fine detail. If not, it could be done with a craft knife...
This step requires simply folding the template together. The grey side faces downwards, the side panels fold up, the bracket section folds back on its...
Place the electronics inside the radio. The speaker, AM/FM switch, the volume and the tuning dials all slot into the holes. The chip board fits into t...
Simply fold the cover over, and your low cost cardboard radio is done! I would really appreciate any feedback.
Download our new apps for iOS, Android and Windows 8!
© 2014 Autodesk, Inc.
By clicking "Create Account" you are indicating that you have read and agree to the Terms of service.
Already a member? Login »
Enter the email associated with your account and we will send you your username and a temporary password.
Not a member? Sign Up »