DIY Remote Control Switch Kit by 2262/2272 M4 Bread Board & Relay for Maker

7,298

116

11

Posted

Introduction: DIY Remote Control Switch Kit by 2262/2272 M4 Bread Board & Relay for Maker

smart home is coming to our life. if we want smart home come true, we need many remote control switch.

today we going to do a test, do an easy circuit to learn the theory of remote control switch.

this kit design by SINONING ROBOT

we have give an list to tell you what component going to use, if you feel it difficult to collect them, you can direct buy the kit from HERE or Here

Step 1: What We Need?

we can see the photo above .

and we have give you a list.

Step 2: See the Theory Diagram

we have make a simple diagram to show it,

and we have draw an diagram using bread board to show it clearly.

if you have any question, please feel free to ask me.

Step 3: Do It

use three photo to show it. just follow.

Step 4: VIDEO Guide to Make Remote Control Switch.

we have give an list to tell you what component going to use, if you
feel it difficult to collect them, you can direct buy the kit from HERE

Share

Recommendations

  • Epilog Challenge 9

    Epilog Challenge 9
  • Sew Warm Contest 2018

    Sew Warm Contest 2018
  • Paper Contest 2018

    Paper Contest 2018
user

We have a be nice policy.
Please be positive and constructive.

Tips

Questions

10 Comments

Can I do the same with 220v light bulb to operate remotely?

Perhaps it would be simpler to use a transistor instead of a relay board to turn on and off the LED. I'm gonna try this asap as I got the parts, but haven't figured out how to use my remote control yet. (315 mhz). Thanks!

in order to control high voltage, so we use relay.

I remember when Instructables didn't have businesses posting their overpriced products as projects on here. All the components can be purchased for this project for less than HALF what the Author is charging. BUYER BEWARE !

Nice one

Can you help me I need to turn off the A/C when the door is open and back on when closed,

I was thinking of a double pole reed switch magnetic hacked into the control fob your are using, so it will flip flop the relay, can only find open signals not working both ways

I bought this


http://www.aliexpress.com/item/DC-12V-4-CH-4CH-RF-...

Any ideas or help would be great thanks

what is the XD-YK04?

oh, i see. it is a 315MHz receiver module