Print PDF
Favorite
Email
Step 4Billy would be proud!
Roll your putty into a nice strip about 1/4" thick.
Wrap it around the filter/t-mount and break off the excess.
Press it around both of them to get it nice and tight.
Make sure there isn't any on the bottom part that connects to the camera because that will be flush on the mount. You also need to leave a little room for your lens to thread on. If your lens is broken like mine you can just put the lens on and permanently affix it.
Wrap it around the filter/t-mount and break off the excess.
Press it around both of them to get it nice and tight.
Make sure there isn't any on the bottom part that connects to the camera because that will be flush on the mount. You also need to leave a little room for your lens to thread on. If your lens is broken like mine you can just put the lens on and permanently affix it.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
