Introduction: DIY Simple Modern Desk

Picture of DIY Simple Modern Desk

This is a very simple and modern looking desk. It's made out of plywood, with a stained top and painted legs. It's lightweight, easy to disassemble and very affordable to build. It would be perfect as a student's desk, in a cool modern office, or if you're looking to incorporate a stylish work space in your home.

Step 1: Materials

This build requires about 2/3 of a sheet of 3/4 inch plywood.

You're going to need the following cuts:

  • A - 1 @ 26 x 40 inches (for the top)
  • B - 4 @ 27 3/4" x 4" (for the legs)
  • C - 4 @ 21 1/2 x 4 " (for the legs)
  • D - 4 @ 6 x 4 ", 45 degree (for brackets)
  • E - 2 @ 13 x 1 1/2 (for support)
  • F - 2 @ 1 3/4 x 1 1/2 (for support)
  • G - 3/4 inch strips (for edgebanding) made of either wood, metal, or some other material.

You're also going to need:

  • drill with 1/8" bit
  • glue
  • 1 1/4" drywall screws
  • paint / stain
  • staple gun + staples

Step 2: The Top

Picture of The Top

Now, let's start with the top. In order to give the top a more interesting look, I decided to create the illusion of separate boards, even though it's made up of one piece of plywood. So I'm using masking tape, separating out five boards. Each board I'm staining using a slightly different colored stain.

I start with the three middle boards, pull off the tape, re-apply some tape to stain the middle two boards, and then I let it dry. I continue to work with a darker stain in the periphery around the whole table to give the surface a more lived-in, realistic look.

The next day, I start applying shellac, first underneath, then about five coats on the top. You could use any finish you prefer, such as polyurethane or lacquer, also.

Step 3: The Base

Picture of The Base

To build the base only requires a few steps.

So we have cut B & C, and those primarily make up the base. So let's attach B & C together with glue and screws and basically make two boxes, one for each side of the desk.

Next, let's put on the brackets on opposing sides. I'm using staples for the sake of simplicity.

And there you go, the two legs, completed with brackets for stability, and they make a big difference.

For a contrasting base, I decided to use oil paint. I started with a primer, and then I moved on to a glossy white paint, sanding in between coats.

Step 4: ​Assembling

Picture of ​Assembling

To assemble the desk screw in the legs to the top. Also, screw down the support in the middle, and the brackets connecting the legs to the bottom of the table. These would be a good idea to paint too.

Edging

Now for the edging, there are several options. I wanted a metallic edging to contrast the wood and the white. So first, I started with aluminum that I cut and bent. However, it broke, so I decided to paint strips of wood with aluminum paint and staple that on. Another option would be to put on wood edge banding ahead of time and staining it the same as the top.

Step 5: Finishing the Desk

Picture of Finishing the Desk

Finishing

Now, to bring down the gloss level a little bit, it's a good idea to finish the piece with some wax polish and steel wool, this makes the surface smoother, and not quite as shiny. Wipe off with a cloth when you're done.

You can find the wax polish here: http://darbinorvar.com/shoppe

And there you have the finished desk. A very simple design, easy to put together. Lightweight and easy to move. Cheap to make, and of course there are endless possibilities in terms of variation when it comes to color and design.

Step 6: Conclusion - Watch the Video!

For a much better look at the process, make sure to check out this quick 4 minute video on how to build this very simple desk.

Comments

sosclosetsandfurniture (author)2015-07-03

Your work shop is embarrassingly neat! I am so jealous! Nice table. I'm looking to build something similar for my son. That is his "look". I like the multi stained top. That is a nice touch.

angelwhysper (author)2015-06-20

Love the way that you did the top in different shades of stain, it makes it a little more versatile to match with other furnishings in the home. Very nice job.

vinz3nt (author)2015-06-03

Very nice!

Next time heat up the aluminium with a blow toch, it will bend much more easily . But this is no guarantee since cheap aluminium is made of cheap alloys which break more easily. Watch out, you can't see the aluminium is hot!

Or ask a construction Company where they bend aluminium.

I think using real aluminium will enhance the look dramatically.

Jeffer62 (author)vinz3nt2015-06-04

But in Canada we spell it aluminium. But we spell blow toch like this (blow torch I believe is the correct spelling!) P.S. Just grinding your gears!

vinz3nt (author)Jeffer622015-06-06

Gears......grinded....grrrr, missed that one! :-D

vinz3nt (author)vinz3nt2015-06-03

Oh, and if you're wondering, aluminium is the correct spelling here in Europe ! You Americans just spell it wrong ;-)

pcmudpuppy (author)2015-06-06

I love the colour of your table top. What were the stains you used. I like the natural cherry wood colour.

ezblues (author)2015-06-05

Just one thought that might help in the long term. It is better to always use wood screws in place of drywall screws. The drywall screws will tend to lose grip and back out over time. But the design and overall work is very nice and I , along with others here, will be building one for each of my grandsons.

woodNfish (author)2015-06-05

The way you stained the top was very clever. Nice, elegantly simple design too.

rblubaugh (author)2015-06-05

Really liked your Instructable; your woodworking abilities are very good. I like the project and may build it for one, or more, of my grandchildren, making variations to suit each one.

kbbaktha (author)2015-06-05

Excellent Instructable & project. So simple yet so greatly elegant and ideal for a DIY with limited skills and tools. Thanks for sharing.

Edbed (author)2015-06-03

This looks really professional and really well finished.

darbinorvar (author)Edbed2015-06-04

Thank you!

køye (author)2015-06-04

Simply fantastic, in the end it says watch the video, but when I click around nothing happens except that a picture opens. Do you have a link?

darbinorvar (author)køye2015-06-04

Hi, here's a link to the video: https://www.youtube.com/watch?v=neysjxkJeyc

køye (author)darbinorvar2015-06-04

Thanks a lot. Your YouTube link worked, and a really well made and easy to understand video. Again thank you. Greetings from Norway

darbinorvar (author)køye2015-06-04

I'm glad it worked. Tack!

urdivine (author)2015-06-04

Very impressive and I learned some things. Appropriate music for the video too.

darbinorvar (author)urdivine2015-06-04

Thank you!

invader1802 (author)2015-06-04

Beautiful design, I so envy your working space :D.

BTW, great lamp too

darbinorvar (author)invader18022015-06-04

Thank you! I'm thinking of making a build video of the lamp soon too, love making lamps!

DIY KING 00 (author)2015-06-04

Smart looking desk,by the way you have got an aewsome collection of tools.

darbinorvar (author)DIY KING 002015-06-04

Thank you! Yes, I've been collecting them over time:)

tinaciousz (author)2015-06-04

Hey there! Do you like sewing? We're giving away Spoonflower credit to buy your own custom fabrics. Enter the Bedroom Contest to win! I think this project could do well :)

www.instructables.com/contest/bedroom/
bravoechonovember1 (author)2015-06-03

love the look of the desk!

On of the reasons the aluminum broke is that it has a grain and if you bend it with the grain it breaks

About This Instructable

28,482views

651favorites

Bio: Hi I'm Linn and on my Youtube Channel I have lots of great videos about building, construction and fun projects. You can also check ... More »
More by darbinorvar:Build a Bed From a Sheet of PlywoodModern Nightstand W/ Concrete TopLED Book Safe W/ Secret Compartment
Add instructable to: