Introduction: DIY Smoke Bomb

Sometimes you need some smoke if it for a video production, for fun, or just to experiment. I'll teach you how to make a simple smoke grenade.

Step 1: Ingredients

You will need scissors, coke can (or foil) and matches.

Step 2: Preparing the Heads

Using the scissors or pliers cut the match heads of the match cut about 15 or 20.

Step 3: Last Step

Using the scissors cut the can or foil to a size where you will be left with excess the you can fold over, leave small crevice for the smoke to escape.

Step 4: Activate the Bomb

Hit it hard with a hammer for it to smoke even though it will not a explode there is a possibility so wear eye protection and ear plugs. More equals more smoke experiment. (I will not take blame if you get hurt doing anything in this instructable.)

Comments

author
IsaacPierce made it!(author)2016-02-18

cool!

author
IsaacPierce made it!(author)2016-02-18

cool!

author
mkramer4 made it!(author)2016-02-15

Awesome! I used to do this when I was much younger, different method though. I would reverse a pack of matches so they would all be on the strike strip. Tape it closed and throw it hard on the ground, same effect. So much fun outside only and never near anything flammable!

About This Instructable

2,009views

12favorites

More by supercoolcat:Servicing Vintage SprinklersDIY Smoke BombHow to Clean Slow T-v Remote
Add instructable to: