Introduction: DIY Stylus!

Picture of DIY Stylus!

A stylus is something you can use in place of a finger on your touch-screen electronic. Styluses can be expensive.

Step 1: Things You Will Need;

Picture of Things You Will Need;

A gum wrapper with a metal coating,

Tape,

A pencil

Step 2: Fold Over the Gum Wrapper So It Looks Like This on the Edge of Your Pencil.

Picture of Fold Over the Gum Wrapper So It Looks Like This on the Edge of Your Pencil.

Step 3: Get a Very Small Piece of Tape and Tape the Wrapper Down.

Picture of Get a Very Small Piece of Tape and Tape the Wrapper Down.

Step 4: Fold Down the Other Side of the Wrapper So It Looks Like This.

Picture of Fold Down the Other Side of the Wrapper So It Looks Like This.

Step 5: You Are All Done! When Using the Stylus Make Sure You Are Touching the Gum Wrapper or Else It Wont Work.

Thank-you for reading,

If you enjoyed please vote!

Comments

About This Instructable

503views

11favorites

License:

More by littleCUPCAKEZ:Homemade Toothpaste for Dogs!Simple Summer Treat for Dogs, Beat the Heat!Campfire Roasted Banana Boat !
Add instructable to: