Introduction: DIY Survival PVC Bow
This is my entry for the survival challenge and the hack it challenge. This is a survival bow that is made out of pvc and nylon string braided. I came up with this idea a while back when I had bought a pvc pipe and had some left over........ and this happened! It consists of SCH 80 PVC pipe, and a nylon string braided. I used rainbow string for added fun! *+*+*+*+*WARNING*+*+*+*+* I am not liable if you end up killing yourself making this project.
Step 1: Get SCH 80 PVC Pipe
This is straightforward, go to your local hardware store and buy the pipe it come in 10 foot lengths and costs about $3.00 USD per length.
Step 2: Cut to Specified Length
Cut your newly acquired pipe to the length that suits your needs. For example, a grown man`s longbow should be about 5` feet long
Step 3: Saw the Ends for the String
this is also simple. Use a saw and cut the notches for the string and make sure they are straight so you don't get spung by the string when you pull back to shoot. I know that by personal experience xD!
Step 4: Make the String
you now need to braid the string. this is a tedious process that will take a while to do, but if done well, will make a string that will last years to come. After that knot the string so it makes a place for the notch to hold onto.
Step 5: String the Bow and Shoot!
This is the big payoff! string the bow and have fun! You can also take it further and add a ledge if you want to.
Participated in the
Survival Skills Challenge
Participated in the
Hack It! Challenge