Step 3: Drawers
Cut strips out of the 3/4" for the front. When measuring leave equal distances between them to account for the drawers. Also mount support brackets for the drawers running front to back.
Now measure and cut the sides for the drawers and route grooves along the bottoms to mount the bottom panel. Then cut the bottom out of the paneling, take into account the larger size to fit into the grooves cut into the sides. Fasten the back and two sides together using wood glue and nails, slide in the bottom piece and the attach the front in the same manner.
Now measure and cut the sides for the drawers and route grooves along the bottoms to mount the bottom panel. Then cut the bottom out of the paneling, take into account the larger size to fit into the grooves cut into the sides. Fasten the back and two sides together using wood glue and nails, slide in the bottom piece and the attach the front in the same manner.
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
