Want to get rid of a wart, but don't want to use harsh salicylic acid or pay for an expensive wart-freezing kit? This instructable will show you how to freeze off your own warts for 1/3 the price.
 
Remove these adsRemove these ads by Signing Up

Step 1: Get the supplies

You're going to need a can of computer duster from your local office supply store. The ingredients in the one I've used is simply tetrafluorethane gas (non-carcinogenic, and non-flammable for the record) compared to the retail wart remover which is dimethyl ether, propane and isobutane.

Also pick up a pack of plastic Qtips.

Duster: USD$7 for a giant can (12oz)
Qtips: $2.50 for 375

vs.

USD$25 for a wart freeze off kit (12 uses total)

ukumar7 says: Apr 12, 2013. 4:36 PM
I used wart off over the counter wart remover. It works but it takes forever. You have to apply the stuff daily for us to 15 days and eventualy the skin and wart should peel off. Unfortunately it did not really work because it didn't peel off the whole wart and it grew back. If you really want it to work you have to keep dedicated to daily applications and possibly having to do it again if it doesnt remove all of the wart. Wart Control from ForcesOfNature, anyone tried this? http://www.forcesofnatureusa.com/Wart-Treatment-s/1819.htm
bleachworthy says: Jul 23, 2007. 6:54 PM
(removed by author or community request)
chemistprof in reply to bleachworthyJun 7, 2010. 9:55 PM
Wow, it's amazing how people will simply make stuff up and post it online. Difluorethane is used as a propellant in the above mentioned dustoff because, like all other hydrofluorocarbons, it's chemically inert. Other fluorinated hydrocarbons are also used as refrigerants simply because they are inert, and are liquid over the appropriate temperature and pressure ranges experienced in a refrigeration system. The same goes for teflon, a hydrofluorocarbon made by Dupont and prized for it's resistance to extreme chemical conditions, such as extreme acidity, or exposure to strong oxidizers, let alone it's tendency to not stick to anything (frying pans, etc.). Difluoroethane does not form hydrofluoric acid upon contact with moisture, no matter how extreme the conditions. If it did, it certainly wouldn't make for a very safe consumer product intended for dusting off electronics! If you experience tissue necrosis with the above cryogenic treatment in a location other than your wart, it is because you got the very cold liquid on part of you skin that was not the wart. This is more a cautionary tale for those with poor eye hand coordination. If you can't get the cold liquid to go where it's supposed to, then no cyrogenic home treatment will work for you. You should instead face the music, and go to a dermatologist.
KirkH420 in reply to chemistprofDec 17, 2011. 12:16 PM
@chemistprof You sound very knowledgeable however this I've done this to myself and other people and it does work. Difluorethane is the agent which basically acts as though it were liquid nitro. Sometimes several applications will be needed over a few weeks. Turn can upside down while wearing eye protection and spray onto a q tip. Apply to wart with q tip and hold till it turns white and you'll feel a minor sting. Leave it alone for 3 to 5 days and it will become a scab. You will begin to notice it itches a lot.... you will end up scratching off the scab and the wart is either gone or noticeably smaller. Knowledge is power and can take you anywhere, but I recommend not letting your knowledge close your mind to ideas which don't make sense because of what you know.
brandon borick in reply to bleachworthyDec 17, 2008. 8:24 PM
wart freeser fom the store has difuorethane
amz-fx in reply to bleachworthyMar 7, 2008. 1:35 PM
Absolutely not true. Difluoroethane is a common aerosol propellant and stable in contact with water. It is widely used in hair sprays and deodorants, including those which contain water. It is also known as HFC-152a

ccrook (author) in reply to bleachworthyJul 23, 2007. 11:09 PM
Furthermore, this is tetrafluorethane not difluroethane.

http://en.wikipedia.org/wiki/R-134a

More info as to why it's safer.

Thanks for your concern but you seem to be an alarmist.
ccrook (author) in reply to bleachworthyJul 23, 2007. 11:05 PM
Funny, I've never had any adverse reactions as you've described. Maybe if it's "gross over exposure" like they've mentioned. My guess is that the "turning yellow and blisters appear" is from frost bite not hydrofluoric acid. "Real wart remover" in the freeze off is more like 5 fold the price you mentioned. In fact: "Decomposition - Decomposition products are hazardous. This material can be decomposed by high temperatures (open flames, glowing metal surfaces, etc.) forming hydrofluoric acid and possible carbonyl fluoride. " Luckily my skin is not an open flame or glowing metal surface so I would deem this relatively safe. I still stand by my disclaimer. If it really was a hazard to get it on your skin they wouldn't sell it in stores without huge warning labels. Methinks you've watched one too many ER episodes.
bleachworthy in reply to ccrookJul 24, 2007. 12:17 AM
No, not an alarmist. the information I provided was for Dust Off brand name. it is real, I have had it happen to me, it sucks balls.
ccrook (author) in reply to bleachworthyJul 24, 2007. 7:58 AM
Except you were talking about difluoroethane. I specifically used tetrafluoroethane (see above). Dustoff comes in different forms.
KiwiGran says: Dec 9, 2011. 7:23 PM
My doctor has had two attempts at freezing off a large wart I've had on my hand for about 18 years. Both these treatments were pure torture and failed.

Two weeks ago I decided to try something new. I purchased a glass (crystal) nail file which I use each morning to file a little more off the wart. It is now level with the skin surface and will soon be gone.

Very easy and painless.
jbean3 says: Aug 13, 2011. 8:27 PM
This could be a possible solution to get rid of a wart but there are several other easier more productive ways. Not only are there many over the counter products available at your local drug store but several common house hold items can also be used as home remedies and work just as well! Check out this website http://www.getridofwartfast.com ive found several helpful things its worth the look!
kasaDD says: Aug 22, 2010. 3:09 PM
My dad is a doctor and he uses this and says it works better because the dust spray gets colder.
misslarue says: May 16, 2009. 1:16 AM
I haven't tried it yet, but I've read that tea tree oil, or Melaleuca alternifolia oil, is an effective natural remedy. Tea tree oil is a really lovely product from Australia--it tingles and smells kind of like eucalyptus, and I've used as a treatment for cuts and blisters, because it acts as an antimicrobial. Its also the main ingredient in the Derma Remedies product. I'm going to make an experimental paste of garlic and tea tree oil and let you guys know what happens to the annoying wart on my right heel (the place where I always get blisters from sandals).
rob123 says: May 3, 2009. 11:19 PM
Never use dust remover for wart removal, its crazy!!

Derma Remedies have an awesome product for wart removal. Their stuff is natural and really works!

You just apply to the warts and they flake away by themselves and never grow back. Plus no scarring! Great stuff!

Check out their website to order (they have a buy 2 get 1 free special too)
http://www.dermaremedies.com
anthony41 in reply to rob123May 7, 2009. 4:48 PM
Yes! I agree I tried the product from Derma Remedies too. It worked way better than anything else I tried. Mine just kept growing back with cutting them off/freezing. After a short period of time they changed color and fell off. No burning or scarring. Can't even tell where they ever were on my skin. I was skeptical at first, but not a skeptical as trying Dust Off......LOL! Check them out! You won't be sorry you did!
Yerboogieman says: Jun 25, 2008. 1:33 PM
will this work on a mole?
pickford78 in reply to YerboogiemanOct 6, 2008. 6:04 PM
probably not. it will also hurt like hell.
Mac_Tonight says: Jul 10, 2008. 7:30 AM
Just don't breathe it in accidentally. This stuff can and will kill you.
garden burger says: Jun 28, 2008. 10:47 AM
when i saw the picture of the dust remover i just thought "what crazy person would ever try this"
avengingwatcher says: Jun 15, 2008. 7:03 PM
This worked like a charm for me. 3 dollars for it :) Thanks so much for the idea, almost a year later and still healthy and wart free. Saved me over 17 dollars.
drerock says: Jun 12, 2008. 4:14 PM
it didnt work, dammit
yoitspoe says: May 14, 2008. 2:47 PM
tetrafluorethane is actually flammable under a few certain circumstances and may cause flash fires, but most of the time you're safe
austin says: Nov 18, 2006. 8:08 PM
so does this work for genital warts? lol, my firends and i used to mess around with each other by sneaking up behind each other and spraying tthem with this stuff, It would hurt like hell, and as long as you didnt do it to long it would not cause permenant damage.
ccrook (author) in reply to austinNov 19, 2006. 11:58 AM
My one friend used an retail kit on his genitals and it worked just fine despite the warnings not to. He was going to get some LN2'd at the health center anyway, so I really don't see the difference between that and this. Again, I'm not a doctor, so if you end up maiming your unit, I'm not responsible.
CementTruck in reply to ccrookNov 19, 2006. 2:09 PM
Hmmm. Genital warts + duct tape underwear/cup/jock strap/G-string.

1)Cheap
2)Disposable (never needs washing)
3)Removes warts
4)Epilates - side effect (removes unwanted hair)
I'll stop here----

I don't see a down side. ;)
NonPermissiveEnvironment says: Nov 18, 2006. 8:39 PM
Duct tape works better. It's been proven.
ccrook (author) in reply to NonPermissiveEnvironmentNov 19, 2006. 2:38 AM
Duct tape takes forever. I'd rather do this for the same period of time with less maintenance than changing a piece of duct tape. When my dermatologist starts prescribing duct tape, I'll let you know.
spinach_dip says: Nov 17, 2006. 7:42 PM
1, 1, 1, 2 Tetrafluorethane (R-134a) has a boiling point of −26.6 °C (−15.9 °F)
ccrook (author) in reply to spinach_dipNov 18, 2006. 4:10 PM
Compared to: propane: -42C dimethyl ether: -22C isobutane: -12C So its pretty close. It's definitely does the job.
Andrew546 says: Nov 17, 2006. 11:29 PM
I fixed the label on your spray can :-p
Andrew546 in reply to Andrew546Nov 17, 2006. 11:51 PM
Whoops, I guess using the right picture would be a good idea...
dust.jpg
canida says: Nov 17, 2006. 7:58 PM
Have you tried duct tape? Studies show that it's more effective than freezing for wart removal.
Andrew546 in reply to canidaNov 17, 2006. 11:19 PM
Yay, i want to struggle to keep duct tape on my hand for 2 months while my wart slowly dies of old age!!! Haven't you heard? Random pieces of duct tape on you hand for 2 months is the newest, most awesomest fashion statement out there! 2 months, or maybe a week or so, hmm, which should i choose?
spinach_dip in reply to canidaNov 17, 2006. 8:25 PM
yea, but the duct tape takes weeks, and it's a pain in the @#$ when the tape must be kept applied to an area that you are always washing, such as your hands
merseyless in reply to spinach_dipAug 2, 2008. 4:12 PM
Duct tape... what cant you do
spinach_dip says: Nov 17, 2006. 7:38 PM
Computer dust-off spray: not intended to diagnose, cure, treat, or prevent any disease
TheCheese9921 says: Nov 17, 2006. 6:58 PM
wo do you think this will work on a corn i have one on my foot
ccrook (author) in reply to TheCheese9921Nov 17, 2006. 7:36 PM
I can't recommend it for anything other than molluscum or warts (what I've seen it used on) but I would assume, if freezing off corns is normal practice at G.P's offices, this would work just fine.
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!