Introduction: DIY Washer Necklace

Picture of DIY Washer Necklace

This is a beautiful, shiny, and modern looking necklace made from washers and tin wire. It's a simple yet elegant design.

Step 1: Design

Picture of Design

First choose the design of your washer necklace. I chose the design shown in the picture above, but feel free to express your own creativity and make it your own!

Step 2: Connecting Washers

Picture of Connecting Washers

Take a flexible tin wire and loop it through both washer holes and twist it together to join it. Keep repeating this for all the connections until you're washer necklace is complete.

Step 3: Necklace Strap

Picture of Necklace Strap

Tie a double knot with a nylon necklace wire around the loop of the two end-washers.

Step 4: Enjoy!

Picture of Enjoy!

Show off to you're friends you're shiny and modern looking necklace!

Comments

About This Instructable

70views

5favorites

License:

Bio: Aerospace Engineer working in Software Development with a passion for Hardware.
More by TechMartian:Flying Captain America's Shield - RC PlaneWide Angle ShotsLED Ping Pong With Shift Register
Add instructable to: