Introduction: DIY a Robotics Arm

Picture of DIY a Robotics Arm

Besides a desk lamp and notebooks, you can now also put your own Robotic Arm on the desk. Built of metal beams and a gripper, with a MegaPi and two stepper motors to power it, the Robotic Arm can catch many objects. And it has several degrees of freedom and can rotate freely at wide angles, so it can easily catch everything you want as your hands. Seeing is believing, come and build it as quickly as you can!

More tutorials please visit http://www.makeblock.com/
Our community: http://openlab.makeblock.com/

Step 1: Video Demo

Step 2: Building 15-1

Picture of Building 15-1

All material from Makeblock

check nowhttp://www.makeblock.com/beam0824-160-blue-4-pack

You can watch the complete animation tutorial video:

http://openlab.makeblock.com/topic/57b183382049f5a661751fc3

Our community:http://www.makeblock.com/

Step 3: Building 15-2

Picture of Building 15-2

Step 4: Building 15-3

Picture of Building 15-3

Step 5: Building 15-4

Picture of Building 15-4

Step 6: Building 15-5

Picture of Building 15-5

Step 7: Building 15-6

Picture of Building 15-6

Step 8: Building 15-7

Picture of Building 15-7

Step 9: Building 15-8

Picture of Building 15-8

Step 10: Building 15-9

Picture of Building 15-9

Step 11: Building 15-10

Picture of Building 15-10

Step 12: Building 15-11

Picture of Building 15-11

Step 13: Building 15-12

Picture of Building 15-12

Step 14: Building 15-13

Picture of Building 15-13

Step 15: Building 15-14

Picture of Building 15-14

Step 16: Finish

Picture of Finish

All material from Makeblock

You can watch the complete animation tutorial video:http://openlab.makeblock.com/topic/57b183382049f5a...

Our community:http://www.makeblock.com/

Step 17: Coding

Picture of Coding

You can watch the complete animation tutorial video:http://openlab.makeblock.com/topic/57b183382049f5a...

Our community:http://www.makeblock.com/

Comments

About This Instructable

1,757views

24favorites

License:

Bio: Makeblock was founded in 2012 as the world's first open-source robot and programing platform. With more than 400 mechanical components, electronic modules, and software ... More »
More by Makeblock Robotics:How to Use Scratch or Arduino to Program a MBot 3D Capture B by Makeblock How to do a cartoon project with Airblock and paper cups
Add instructable to: