Print PDF
Favorite
Email
Step 5Getting someting... finally!
ok so it's time to put this thing together. at this point you should have a desk core, a pillow case, and a desk top ( that we didn't do anything to)
The key here is that the flat side of the core is facing out and being stapled on. resulting in the pillow being perfectly flat on the hard side.
First, line up the core to the pillow case and staple one long side. The do one of the short sides, then the other long side. I used a heavy duty stapler with 1/4" staples. Be careful with this.
You should have left one side open. Before you staple this side closed you want to stuff the pillow with stuffing foam fr polyfill . Stuff it to the harness that you like to have when done. Then staple the final side.
Check out the pictures.
The key here is that the flat side of the core is facing out and being stapled on. resulting in the pillow being perfectly flat on the hard side.
First, line up the core to the pillow case and staple one long side. The do one of the short sides, then the other long side. I used a heavy duty stapler with 1/4" staples. Be careful with this.
You should have left one side open. Before you staple this side closed you want to stuff the pillow with stuffing foam fr polyfill . Stuff it to the harness that you like to have when done. Then staple the final side.
Check out the pictures.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
