Introduction: DIY Bottle Out of Very Common Stuff in Your House.

Picture of DIY Bottle Out of Very Common Stuff in Your House.


Can't find a bottle of water? Or just feel like making something creative and cool? Well, here is where you will find out how to make a "bottle" out of extremely common stuff in your house !

Step 1: Materials Needed

Picture of Materials Needed

Here are the materials needed to make your bottle:
-A pair of Sizors (optional) - Pic 2
-A cup (any size) - Pic 3
-A straw - Pic 4
-Kitchen transparent wrap - Pic 5
-An elastic (a nice thick one will do great)

***REMEMBER!!! Put whatever liquid you want (i.e., water) before you do anything!***

Step 2: Putting the Wrap On

Picture of Putting the Wrap On

Now, first place the wrap on the top of the cup you are using.
Then, squish the wrap on the side of the cup so the top of the cup has sort-of-smooth wrap on it.

Step 3: Putting the Elastic On

Picture of Putting the Elastic On

Put your elastic around your "bottle" about 1-3 inches away from the top, holding the kitchen transparent wrap on the cup.
Make sure the elastic is not all curled up, if it is, make it show only the one side.
Pull down on the elastic to make the wrap on the top of the cup smooth.

Step 4: Inserting the Straw

Picture of Inserting the Straw


Gently poke a hole in the wrap on the top of the cup with your straw.

Step 5: Cutting Off the Excess Wrap (optional)

Picture of Cutting Off the Excess Wrap (optional)


With the sizors, cut the excess wrap off of the side of the cup about an inch or two below the elastic.

***This step is optional***

Step 6: Yay! Your Done Now! :D

Picture of Yay! Your Done Now! :D


This is my first instructible. This is what it should turn out looking (also shown in the intro)...
Hope you like it!

                                                                                                                                                                                                                                     -Soldeir 9

Comments

dwhole (author)2011-07-26

Funny, this reminds me of getting bubble tea with boba. They have a machine that heat seals a plastic film on the lip of the cup, then you poke your pointed straw through the "lid". Good simple instructable. Mmmm, now I'm craving some boba!

About This Instructable

783views

0favorites

License:

Bio: TOMAHAWK!!!!!!!
More by soldeir 9:S9DP (Soldeir 9's Dart Pistol)K'nex Bolt-Action MechanismDIY bottle out of very common stuff in your house.
Add instructable to: