Print PDF
Favorite
Email
Step 5Laser cuter
In my case I had the option of using a laser cutter. I copy and pasted my modules as many times as I needed in Illustrator (One layout of the four tooth pieces and one for the five tooth pieces). I then sent them to the machine and got them cut.
If you are doing it by hand: Print a life size version of a module in a transfer paper and trace it many times to the material with chalk or something that you could clean up after and cut the pieces.
If you are doing it by hand: Print a life size version of a module in a transfer paper and trace it many times to the material with chalk or something that you could clean up after and cut the pieces.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
