Here is an easy set up to create a great diy toolbelt out of scraps around the house.

Step 1: Supplies

Here is what I used to create my DIY toolbelt

Old pair of jeans

scrap fabric


sewing machine

Step 2: Cut Material

I started by cutting the material I needed to make the bag. I cut off one of the seams of the jeans to create the pockets for the toolbelt

I also cut the scraps of fabric that would be the belt part of the toolbelt.

Step 3: Sew

I started by hemming the top of the jeans, then closed the sides.

Finally I sewed a seam right through the middle to create two pockets to the toolbelt

Step 4: Add Waistband

Then next step was to add the waistband.

I had two pieces for the waistband so I first started by sewing the raw edges on the inside of the band

I then sewed the band to the back of the tool belt pockets.

Step 5: Finished

Finally I was finished with my toolbelt!


<p>JoAnn Fabrics carry belt accessories if you want an adjustable belt. Check this buckle: <a href="http://www.joann.com/dritz-quick-release-clip/8657934.html" rel="nofollow">http://www.joann.com/dritz-quick-release-clip/8657934.html</a></p>

About This Instructable




More by SNLouise:Easy DIY Leather Bracelet DIY easy toolbelt Hardware Bracelet 
Add instructable to: