Introduction: DIY Paper Balisong (experimental)

Picture of DIY Paper Balisong (experimental)

You need 2 pieces of paper

Step 1: Creating the Handles

Picture of Creating the Handles

Tear/cut one piece of paper in half, fold lengthwise before tearing/cutting. Then fold in half four times until it looks like picture 3.

Step 2: Perfecting the Handles

Picture of Perfecting the Handles

Tape the handle together so it looks like this. (Notice I didn't tape to top all the way since later a toothpick will be enthrusted). Do this to both handles.

Step 3: Making the Blade

Picture of Making the Blade

Take a piece of paper and fold in half widthwise. Then fold in half lengthwise. Then fold it until it is about the same width as the handles. Unfold it once.

Step 4: Perfecting the Blade

Picture of Perfecting the Blade

Let a bit of the blade go above the handle. Mark it. Then cut it like in picture 3. Mark where you want to put the skewers in through. Then make the hole.

Step 5: Optional

Picture of Optional

Make the blade like this.

Step 6: Connecting the Handles and the Blade

Picture of Connecting the Handles and the Blade

Use skewers to put the handles and the blade together.

Step 7: Finished!

Picture of Finished!

Have fun!

Step 8:


MsSweetSatisfaction (author)2014-12-06

Neat idea! Looks like it could a fun prop!

Thx. It works btw!

About This Instructable




More by Pacificocean63:DIY paper balisong (experimental)
Add instructable to: