Step 3: Connect the computer peripherals
Pull the cables through and connect all the computer peripherals.
The cable for the scanner is long enough to pull it out to use, so i put it on the bottom shelf.
I loosened the top of the back, so the router antennae could poke through.
If it poses a problem or I get a fifth peripheral I will move the router to the top.
The cable for the scanner is long enough to pull it out to use, so i put it on the bottom shelf.
I loosened the top of the back, so the router antennae could poke through.
If it poses a problem or I get a fifth peripheral I will move the router to the top.
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
