Introduction: DIY Steam-punk Ring Made Out of Some Metal Waste

Picture of DIY Steam-punk Ring Made Out of Some Metal Waste

This ring is basically made out of spring that you can find in an old remote-control devise or clicker as some may say, along with the back of an old hand watch. Just like in the pictures hereunder:

Step 1:

Picture of

What I did, is I took out the spring and super glue it on the back of the hand watch as in the following picture, it looks like a steam-punk smiley face if you have a slightly bit of imagination ;)

Step 2:

Picture of

Then I glued that piece on a ring base or on an old ring

Step 3:

Picture of

This is not necessary, but I just used dark nail polish to cover up the unattractive color of my old ring here:

And all is done... it is unique, quirky and charismatic ring <3


The Steph Show (author)2012-08-20

What a great idea! You're so creative :)

thank you =) blushed!

About This Instructable




Bio: i am a "Philomath", a lover of learning
More by Kawthar Xoubi:Picture frame out of old Hard Disk and CDDIY steam-punk ring made out of some metal wasteA DIY Stylish Ring Made From buttons
Add instructable to: