Print PDF
Favorite
Email
Step 2Drill a 10mm deep hole in the block
This creates a small hole for easy access to the iPad's home button. Of course you can do this last, but we found it easiest to do first.
Find the middle of the short side and mark it 17mm to the inside. This will be the center point of the small hole. Drill a hole, about 10mm deep. We use a large diameter drill bit (19mm, see picture) to create a nice, smooth hole.
Find the middle of the short side and mark it 17mm to the inside. This will be the center point of the small hole. Drill a hole, about 10mm deep. We use a large diameter drill bit (19mm, see picture) to create a nice, smooth hole.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
