Introduction: DIY1705 - MAKE YOUR HEADBAND

Picture of DIY1705 - MAKE YOUR HEADBAND

This turban headband provide options from a day at work to a jaunt on the beach or a lazy Sunday brunch in the park. You will definitely find great matches between these darling pieces and almost any of the outfits you have in your closet.

Download our pattern and make your headband by following 10 simple steps upcycling jeans that you don't wear anymore.

Step 1: Watch This Video:)

Step 2: Reuse a Pair of Lt. Weight Jeans

Picture of Reuse a Pair of Lt. Weight Jeans

Step 3: Download Our Pattern

Picture of Download Our Pattern

Step 4: Trace and Cut the Fabric.

Picture of Trace and Cut the Fabric.

Step 5: Overlay Each Pieces Right Side in and Sew From One Corner to the Other.

Picture of Overlay Each Pieces Right Side in and Sew From One Corner to the Other.

Step 6: Turn Both Pieces Right Side Out.

Picture of Turn Both Pieces Right Side Out.

Step 7: Cross the Two Pieces in the Center of Each.

Picture of Cross the Two Pieces in the Center of Each.

Step 8: Cut an Elastic Piece of 10 Cm (4”). the Elastic Need to Be 4 Cm Wide (1”3/4).

Picture of Cut an Elastic Piece of 10 Cm (4”). the Elastic Need to Be 4 Cm Wide (1”3/4).

Step 9: Fix the Elastic at Each Edge of Each Piece.

Picture of Fix the Elastic at Each Edge of Each Piece.

Step 10: Insert 1 Cm (3”8) of the Elastic in Each of the Remaining Ends, Then Turn the Seam Allowance ​​inward and Topstitch.

Picture of Insert 1 Cm (3”8) of the Elastic in Each of the Remaining Ends, Then Turn the Seam Allowance ​​inward and Topstitch.

Step 11: Share Your Project #denimupcyclers

Picture of Share Your Project #denimupcyclers

Step 12: Wear It :).

Picture of Wear It :).

Comments

About This Instructable

219views

6favorites

License:

Bio: I am a denim upcycler. I beautify flaws and brokenness of old jeans because I think being damaged shouldn’t be the end of the ... More »
More by Kinsu atelier:DIY1705 - MAKE YOUR HEADBANDDIY1704 - RUFFLE-UP YOUR JEANSDIY1703 - JAZZ-UP YOUR SHIRT
Add instructable to: