DMX-512 LED Controller with LED Display

Step 2 Sockets and Resistors

Sockets:

• When placing the sockets, line up the notch on the top-side silkscreen image with the notch on the socket.
• Make sure all the pins are lined up and press in firmly.

Resistors:

• Starting with R1, R2 & R3 are all 10kohm(brown - black - orange - gold)
• Then place R4 which is a 10 ohm(black-brown-black-gold)
• Next is R5 120ohm(black-red-brown-gold)
• Then R6-R15 are all 220ohm(red-red-brown-gold)