DMX-512 RGB LED Wash Light Control Board

Step 2 Resistors and Sockets

Resistors first.

• R1 is 10k ohm, Brown - Black - Orange - Gold

• R2 is 1k ohm mounted vertically, Brown - Black - Red - Orange

• R7 - R21 Are all 10k ohm 1/4w, Brown - Black - Orange - Gold

There is a 16 pin, 14 pin and 8 pin socket to place. Align the notch on the socket to the notches on the top-side illustration.

• Carefully align the pins with their holes, check all the pins will go in and press the socket in firmly.