Introduction: DOODLING 4 DUMMIES: 3D Cylinder

Picture of DOODLING 4 DUMMIES: 3D Cylinder

Materials Needed; Pencil, Eraser, Black Marker/Pen

*= Lightly draw whatever follows. This is intended to making future erasing easier and your final project more beautiful.

Step 1: STEP:1

Picture of STEP:1

Step 1: *Draw two Circles, similar shape and size, apart from each other on the paper. (Horizontally for this tutorial)

Step 2: STEP:2

Picture of STEP:2

Step 2: *Connect the two circles with two horizontal lines. (ie: Connect a line from the top of the left circle to the top of the right circle. And a horizontal line from the bottom of the left circle to the bottom of the right circle.

Step 3: STEP:3

Picture of STEP:3

Step 3: Erase all line that would be 'inside' or 'behind' your 3D shape. (e.g: see picture)

Step 4: STEP:4

Picture of STEP:4

Step 4: Use your marker to trace your finished shape to bold in your 3D cylinder. Then erase all existing pencil lines on the paper.

Step 5: STEP:5

Picture of STEP:5

Step 5: Bask in your artistic glory.

Comments

About This Instructable

490views

1favorite

Add instructable to: