Print PDF
Favorite
Email
Step 19Assembly Step 8: Remaining Resistors
Now lets finish up the resistors. We still got R2 and R4 (249 kOhm), R1 and R3 (750 kOhm), and 8 pieces Of 1 kOhm resistors which are not labeled because they are the last resistors left. Install the two pairs first, and then install the 1 kOhm resistors in all remaining resistor outlines on the PCB (refer to the parts list if find out which resistor is which value).
The picture on the bottom shows the PCB populated with all the resistors.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
