DSman195276's sniper rifle

well, i finally got around to making and finishing my sniper rifle. it's based off of the M24 SWS (Sniper Weapon System). it has a rail system much like the KILLERK magnum, hinge butt plate, detachable bipod, removable scope, comfortable handle, good feeling trigger pull, head rest (for looking through the scope) , emergency iron sights, and removable suppressor (just a barrel add on, mainly to improve accuracy).

i can not take all the credit for this gun, i have to give KILLERK credit for the trigger mecanism. i modified it to work better. you will have to break a green connector to make the trigger mecanism.(don't worry, it's just one connector, and it can be used in the magnum to)

the original idea for using bendy grey rods to create the scope was mepains. i gave it some mollifications to make it more realistic though.

unlike most other snipers, this one goes easy on the pieces for people new to knex that don't have thousands of pieces. you will need a good amount of yellow connectors though. the gun is mostly yellow connectors. it also uses a good amount of the black hand connectors (50) so sorry about that. 16 of them are in the scope so you could make that differently to conserve those pieces.

in the pictures i have almost every combination of pieces that can be made from this instructable. i just thought that might help if you have limited pieces and are deciding what add ons to make for it.

well, i hope you like my sniper rifle. please comment and rate! all spam will be deleted, no matter what it is (unless it's my spam :-P).

Step 1: Piece count by t-man.

piece count

connectors

green 10

white 20

yellow 70

blue 7

red17

orange 25

y things 20

light gray 10

dark gray 2

rods

green 100

red 2

blue 18

white 55

Comments

[slimshaddy]

what is the ammo? and how do u shoot it

[Owenmon]

This gun is really good, except for one thing. The red connector on the ram keeps breaking. :-( Do you have any ideas on how to stop this? I only have 1 #64 on it.

[knexsuperbuilderfreak]

yeh its a very old post but it should work by hot glueing the a little bit of sanding should do the trick

[DJ Radio]

Tape.

[Owenmon]

It's impossible to put tape on it. And it was the connector that broke

Step 5, picture 9.

[DJ Radio]

Its possible. 

[cowscankill]

I use 20 gauge steel wire. Works for every gun I have come across ;)

[dsman195276]

well, mine never breaks with just one 64. i do find that with more it does break, but one 64 is usually fine.

[Shaythegoon]

this is confusing

[wihskas2]

i use ammo with a yellow rod and a orange conector

[wihskas2]

look cool
nice trigger system
cool range its perfect 5*

[Dr.Squirrel]

you can do better...

[dsman195276]

what exactly are you referring to that I could do better on? The scope?

[Dr.Squirrel]

yes

[dsman195276]

 As I said in this step, this scope is not made for functionality, but made to look like the one from the M24 SWS. And it looks close enough to it for me.

[matrix828]

step 4, pic 3. is that a broken green connector there? i dont know if it needs to br broken :S
i wont make it just in case. please tell me if it needs that broken one!
thanks

[dsman195276]

Well, that green connector is part of the trigger mech, and for this mech to work right, it has to be broken.

But, you could probably just change the mech a little so it doesn't need the green connecter. I would love to see it if you do.

[matrix828]

thanks
i am going to try to build it in a bit  and see if it works
if i does i will post a photo on here :)

[DrWeird117]

Wait...Y-Things: 20

[dsman195276]

i don't think t-man made the scope or bipod, which have a combined total of 34 Y connectors.

[DrWeird117]

Oh.

[~Aeronous~]

 you are so weird. I am probably the 999999999th person to say that.

[DrWeird117]

Yeh, probably around that.

[~Aeronous~]

 lolz xD I have surfed through around 90 unrated ibles looking for the lowest rated one.

[dylan034]

love the trigger

[rrr67]

on the end of the barrel, should there be a blue spacer on each side or the 1 its already on?

[dsman195276]

Sorry, it looks like I got lazy ;-) you can put a extra spacer in if you want, it shouldn't make the slightest difference.

[adio]

i made this gun several times i and love it but i find it to be hard to pull back the ram part and a bit flimsy but i still like it

[RMConstruction]

LOSE WIRE DID NOT DESIGN THE CHAIN, I SAW IT IN A KNEX SET! HE COPIED!!!!!!

[dsman195276]

Settle down. ether way, it doesn't really matter.. how do you know he ever had that knex set?

[RMConstruction]

Thats not he point, he didnt design it. he is taking credit from the original Knexperts.

[dsman195276]

Again, how do you know he did not think it up? Just because it was in one set does not mean he ever saw it there.

[lioneatr]

are those wheels on the handle needed?

[StyleCore]

nope

[DIRTRACER39]

why dont some of you guys just buy a REAL rifle, or pellet gun, or airsoft or whatever, ive never seen one of these shoot but i have a feeling that there accuracy is unpredictable and building them is a pain

[dsman195276]

1. i'm not old enough to own a real rifle 2. the accuracy is fair, it's not amazing but it's also not horrible. 3. building the gun is half the fun for me.

[DIRTRACER39]

must be different rules in the US, in Canada i think the age is like 8, and you can get a junior PAL, which allows your parent, if they have a PAL to buy you a gun, then when you turn 18 it switchs to just PAL, and you can get whatever you want , depending on what lisence you have

[mettaurlover]

this thing is violently dangerous to be behind if you don't put the red bar part on to it; half my firing pin hit me in the head very hard.

[killmasteh]

hey i wanna make this just weres the trigger plz exeplain how i shoot this

[Oompa-Loompa]

DSMan, what's a mollification. At first I thought it was a typo but when i went to type it in the response, it didn't come up as a spelling error (the red line under the word). So what is a mollification?