Instructables
This instructable is on how to make a duct tape playing card case because when you mistreat the card cases they deteriorate.
 
Remove these adsRemove these ads by Signing Up

Step 1: Tools

The tools you need for this project are
1. Cards
2. Duct tape
3. Scissors
4. Magnets

Step 2: First layer

Make the first layer by layering strips of duct tape. Half way across the strip. Repeat until 2 and 3/4 as wide as the box of cards.

Step 4: Roll Up The Rim To Win

Roll the sandwiched layers around the card box and tape shut. Then cut off excess from one end and fold closed like wrapping a gift. Then seal with a piece of tape.

Step 5: Flapping Gums

Cut off the excess and cut a slit down each corner on one side. Then cut around the top of the deck to have one flat part(flap). Cut strips of magnet for the clasp. Then put tape under the flap then put a magnet in black side up. Then fold the excess over. Thin the sides by trimming excess.

Step 6: The cold clasp of death

Put the magnetic faces together, and fold over to find out the mounting location of the magnet. To secure the magnet put a piece of tape over it.

Step 7: Additional Ideas

Put rolled up piece of tape over the magnet.
Tuck the flap in.
chipper353 years ago
An excellent effort....I'm going to make this! You might consider doing the first step(s) with (maybe) two different colors of duct tape....so it'd be easier to tell the sections apart.
bubblebut3 years ago
I tried it and it looked preatty good
Japper13 years ago
I ended up just using velcro which worked a lot better
Duct tape case closed.jpegDuct tape case open.jpeg
uwe Japper13 years ago
Thanks for the velcro tip. I constructed (see:http://www.instructables.com/id/Duct-Tape-Camera-Bag) a leash but this is hard to operate (esp. in the dark).

It's cool but would have been better if you gave measurements instead of just saying to make it these proportions to a deck of cards.
and you dont need measurements, you are wrapping it around the box
not all cards are the same thickness and size, and maybe some people would want to make this for their trading cards which are not the size of a standard playing card and come in different dimensions as well.  note i do not play trading card games any more it was just an example.
Japper13 years ago
This was a pretty cool project altho i couldn't find any good enough magnets so i just made it without them.
you should use 9 volt snaps to secure it, like i did in my duct tape wallet instructable. http://www.instructables.com/id/EUT8DXIQUDERIE27EZ/?ALLSTEPS

I went for magnets myself, the 9V clips require pressure that might damage your cards. Magnets require no pressure at all and will hold on enough (if you have decent magnets, I got mine out of magnetix that I never use anymore anyway)

Also, I made another with a DVD box and duct tape. It'll protect my cards better when I'm not careful with the case. 
icanryme2002 (author)  AlexTheGreat7 years ago
This was a spur of the moment type thing. I didn't have time to find a nine volt.
jayro7075 years ago
pretty sweet i would never have thought of doing that, MacGyver would be SO proud.:)
someone should make a macgyver guild.  I like to watch mac on fancast.com and have the macgyver hand book pdf (free download on scribd.com) And im 16!!!
Great job but it would be cooler with colored tape
camo!!!!
mrmath7 years ago
I don't get the last step. You have magnets in the case and the flap. Why do you need to use tape to secure it? Also, love the "Rrrrroll up the Rrrrrim to win" reference!
icanryme2002 (author)  mrmath7 years ago
The magnets were not strong enough through the tape to hold it closed. I was afraid of the case opening and the cards flying out.
Good to know. I bet you could get some stronger magnets at Radio Shack. I remember they used to sell them.
still do
try mutilating a hard drive and using the magnets in that. you'll be able to close it AND hang it on your fridge.
use the magnets out of magnetix sticks just cut the ends
abf2204 years ago
i bet if you upscale it you can make a backpack ill try it
sharlston5 years ago
woaa thats well good,neat design -sharlston
15zhangfra5 years ago
i did somthing like this, except i used a bar of tape to close the flap, and i wrapped the package with tape(sticky side out) the i did the other sides still the same thing though
Never try this with magnets that aren't flat, and do not cover up their surface a lot, or they won't stick to each other. You could possibly make another slot on the side for poker chips...
BobicusIX5 years ago
Haha... That's awesome. I love playing cards and my freinds and i have sets... i think ill try to make this and a set case..
Matt D6555 years ago
hmmm...i play blackjack alot this is cool
casey321b6 years ago
Im a toatal card shark and I have lots of colored duct tape from my duct tape wallets that i sell so i think ill make one of these. also Im going to florida this summer and my grandma lives there so im going to make one with 2 pouches cuz she plays bridge
dude. the POINT of duct tape wallets was that you did NOT have to buy them.
yeah, but people are stupid and they'll buy them. i was once paid to flatten someone's duct tape. i soaked it and then put it between two heave surfaces. the cardboard became malleable and folded into shape ;)
all i did was cover a regular box with duct tape