DVD Shelving for $20 (ish)

Step 4 Glue and Screw the boards

I used the "glue and screw" method for attaching the shelves to the side. The first shelf was put in at 90-degrees at the topside corner. I took a scrap piece of wood (from the 2' cut off one of the sides) and made an 8" spacer. Using the square and spacer block, I glued and screwed the shelves in at the bottom every 8". After all 6 shelves were attached, I put repeated the steps attaching the other side, gluing and screwing in the coarse screws.