Introduction: Dash Phone Holder Modification

Picture of Dash Phone Holder Modification

This is a modification to an existing dash phone holder that broke. It attaches to the air vent, which has the added advantage of cooling the phone on hot days.

Step 1: Pieces

Picture of Pieces

Take the clamping mechanism from the old holder.

Step 2: Disassemble

Picture of Disassemble

Disassemble the arm.

Step 3: Base

Picture of Base

Screw the base to a piece of wood.

Step 4: Reassemble

Picture of Reassemble

Reassemble the clamping mechanism.

Step 5: Binder

Picture of Binder

Bend the clips on a binder to attach to the unit and clamp into the car air vent.

Step 6: Attach

Picture of Attach

Attach the binder to the top of the unit.

Step 7: Grip

Picture of Grip

Attach pads to the inside of the claws for better phone stability.

Step 8: Clip

Picture of Clip

Clip the unit to the car dash air vent.

Step 9: Phone

Picture of Phone

Place the phone in the new holder.

Comments

3366carlos (author)2016-12-18

good job. Paint the wood black. Walmart has black spray paint for $1.00

About This Instructable

2,625views

11favorites

License:

More by djpolymath:Apartment WorkshopHand Plane RestorationsFrench Polish
Add instructable to: