Introduction: Dead Cat Wind Muff Tascam Dr-05

Picture of Dead Cat Wind Muff    Tascam Dr-05

Dead cat wind muffs can be very expensive for a pile of fabric.
For ones that actually work they can be from 16-36$ for one windscreen.
I am going to teach you how to make one for 

Step 1: Supplies

Picture of Supplies

Supplies: -4 X 6" felt -4 X 6 X 1/2 " pillow foam -4 X 6" synthetic fleece with long 1-2 inch long hair    -Rubber band -Hot glue sticks Tools/ stuff you use -Hot glue gun  -Sewing machine and/or needle/thread -Scissors   -Ruler

Step 2: Cut Out Fabric

Picture of Cut Out Fabric

Cut out the 4"x6" square of fleece using scissors.

Step 3: Hot Glue

Picture of Hot Glue

Use the hot glue to attach the foam to the fleece.

Step 4: Wrap Around Recorder

Picture of Wrap Around Recorder

Wrap the fabric around the microphones of the recorder and place a rubber band around to finish.

Step 5: Your Done!

Picture of Your Done!

Use on windy locations without spending 50$


About This Instructable




More by rolfskylark:Building a Bass GuitarKayak WheelsDead Cat Wind muff    Tascam Dr-05
Add instructable to: