Introduction: Deathly Hallows Necklace
This is a fun and easy Deathly Hallows Fandom necklace - make for a friend, as a gift, or for yourself! All you need are wire, chain, and jewelry pliers. If you want to buy this from me, here is the link to buy my necklace:
Step 1: Materials
What you'll need:
- 20 gauge jewelry wire
- 28 gauge jewelry wire
- Silver chain
- Silver clasp
- Jewelry pliers
- Super glue or similar
Step 2: Make the Invisibility Cloak
Make a loop around you needle nose pliers at the end of the 20 gauge wire. Shape around you pliers to form a triangle, and close the end just under the loop at the beginning. Cut off extra wire.
Step 3: Make the Resurrection Stone
Shape the 20 gauge wire around a sharpie or pen to get a circle that fits perfectly inside the triangle.
Step 4: Make the Elder Wand
Cut 20 gauge wire just barely over the length of the triangle.
Step 5: Glue on the Elder Wand
Superglue the wire line onto the triangle. Or, if you prefer, make a longer line and bend wire around triangle instead of glueing it. This is way is harder, but keeps it from falling off.
Step 6: Attach the Resurrection Stone
Using 28 gauge silver wire, bind the circle inside the triangle. Attach chain and jump ring to triangle and a clasp to the end of the chain. You can also make two and attach them to earring hooks.
You project is now complete!