Introduction: Decals Out of Tattoos

Picture of Decals Out of Tattoos

Heres how I used temporary tattoos as decals.

Step 1: Start Up

Picture of Start Up

Your need
1. Wet wash cloth
2. And of course tattoos

Step 2: Application

Picture of Application

Pretty much you just follow the directions on the backs.
You apply the tattoo on a clean dry surface. Soak it with your wash cloth. Hold pressure on it for 60 seconds.
And there you go! Now you have decals.
I included just a few of the things I put mine on.

Step 3: Tackle Box

Picture of Tackle Box

Step 4: CD Player

Picture of CD Player

Step 5: Notebook

Picture of Notebook

Step 6: Wall Desk

Picture of Wall Desk

Step 7: Phone Charger Stand

Picture of Phone Charger Stand

Hope this gave you some ideas.


DIY MACHO MAN (author)2017-02-27

For plastic, clear nail polish works just as well

ok thank you

Leviathan17 (author)2017-02-25

thanks! that's a great idea! I never thought of clear coating it. I try that. thank you.
mind if I put that in the instructable?

I recommend Rust-oleum Painter's Touch clear coat. It comes in shiny or matte. You should spray the whole surface, not just the decal.

yes, that sounds great. I think I have some of that. thank you

DIY Hacks and How Tos (author)2017-02-25

That is a good idea. Put a clear coat on top to seal it and that will probably last pretty well.

About This Instructable




Bio: Hi y'all. I'm Leviathan17. For more info on Leviathan ,look up Job 41:18-21. I am a Christian, but don't be scared ... More »
More by Leviathan17:From Modem to MP3 Player $8.00 LED Shop LightEngraving and Burning Signs
Add instructable to: