Print PDF
Favorite
Email
Step 2Remaining Resistors
With a bit of excess lead, add a jumper from T32 - T31
Add the 10K resistor (Brown - Black - Orange) from E27 - J27
Add the 1M resistor (Brown - Black - Green) from F26 - G26. This resistor doesn't lay down, but goes straight up and down (transistor radio style)
The longer lead of the green LED goes in S25. Short lead goes in T25
The shorter lead of the red LED goes in S26. Long lead goes in T26 (Yes, this is opposite of most LED's)
Add the 10K resistor (Brown - Black - Orange) from E27 - J27
Add the 1M resistor (Brown - Black - Green) from F26 - G26. This resistor doesn't lay down, but goes straight up and down (transistor radio style)
The longer lead of the green LED goes in S25. Short lead goes in T25
The shorter lead of the red LED goes in S26. Long lead goes in T26 (Yes, this is opposite of most LED's)
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
