Print PDF
Favorite
Email
Step 4Finishing Up
Connect the battery box, the red wire goes at T2, the black wire goes at T3. You can thread the power wire through the holes at the bottom left of the board for stress relief. Add the capacitor at [Pe] so the stripe is closer to [Pe].
Add batteries and insert the PICaxe in the socket (the notch as indicated in the photo). That's it! If you buy this kit on Gadget Gangster, the PICaxe will come pre-programmed. there's also a schematic to download and the source code.
Add batteries and insert the PICaxe in the socket (the notch as indicated in the photo). That's it! If you buy this kit on Gadget Gangster, the PICaxe will come pre-programmed. there's also a schematic to download and the source code.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
