Introduction: Deco Podge Dresser

Picture of Deco Podge Dresser

First you will need a dresser

Step 1: Supplies

Picture of Supplies

You Will Also Need:
*cute paper cut into four equal pieces
*deco podge glue

Step 2: Let's Begin

Picture of Let's Begin

Figure out which way to lay your paper (horizontal/vertical). Now paint a thin layer of glue onto the dresser and place a piece of paper one at a time onto the glued area. *Tip-only glue as big as the piece of paper your holding, the glue will dry before you place the next paper down.

Step 3:

Picture of

Make sure to layer the paper on top of each other when placing the next one down. Re-glue, paper, re-glue, paper, repeat. Keep this pattern going in order for it to stick properly. Try to keep the lines as straight as possible.

Step 4:

Picture of

If the lines are not straight, use a thin piece of paper, ribbon, marker, paint or stickers to make the line look better. I started this with permanent marker :-)

Step 5: Tah-dah!!

Picture of Tah-dah!!

One nice looking dresser :-)


So cute! I love the combination of colors of zebra print!

rfraser2 (author)2014-06-20

cute. i've been playing with a similar idea. Ever try mixing other objects in? Like lace and fabrics? FYI :don't take it bad, it's decoupage.

About This Instructable




Bio: I'm all about cool cheap diy stuff that looks expensive :-)
More by kguzman2:Deco Podge DresserBeer WreathDuct Tape Cell Phone Cover
Add instructable to: