Introduction: Decorate Christmas Tree With Papercraft

Hello Guys we are back with some paper crafts for you to decorate your Christmas tree..

We have made these from hard photo paper and you can use anything you like....

We have Made 2 Beautiful Santas And 2 Cute Snowmans...

We Have Got This idea from small santa decorative used in decorating Christmas Tree....

So we decided to make them from paper craft.....

You can download these paper crafts below...

Snowman Parts

Snowman Instructions

Santa Parts

Santa Instructions

DISCLAIMER
This disclaimer is a legal notice covering the injuries caused while working on this instructable. Do at your own risk and Do not play with tools.

So Here's a bunch of materials you need for this 'ible...

Step 1: Materials Required...

For Printing... you will need-

  • A Printer
  • Good Quality Photo paper (A-4 Size)
  • Attached PDFs

For making the paper crafts... you will need-

  • A Pair of Scissors
  • Printed Parts
  • Cello Tape
  • Glue
  • Hobby Knife

That's all You Need....

After having these materials go to the next step...

Step 2: Santa:Cutting...

After Printing all the parts on the recommended A-4 photo paper...

Cut all the parts of the Santa pdf and then fold all the necessary folds...

There are in total Twelve parts for the Santa Decorative...

Make sure that you haven't missed out any part...

use the hobby knife to cut the holes marked with pink outline and also cut the necessary pink lines...

Use the images or the instructions pdf for the help...

Don't forget to cut the sharp triangles which are needed for sticking the base and the hook to the Santa...

Be careful while cutting the belt and the moustache or nose not to cut them half...

If you have used normal a-4 size sheet then the hook needs special care...

After cutting these just go to the next step for assembly instructions...

Step 3: Santa:Assembly...

Start assembling the Santa...

First make a cone with the Santa triangle...

And then add the belt to it...

Fold the hands and place the hands so that the mountain fold comes to the front side...

Then place the beard of the Santa from the center towards the sides...

This will help you to maintain the symmetry...

Then add the cap of the Santa... and then it's white strip from the one side towards the another side...

then place the moustache with nose to the Santa...

Now stick the Santa to the base and to the hook...

So your Santa Decorative is ready and just follow the next steps for the snowman...

Step 4: Snowman:Cutting...

After Printing all the parts on the recommended A-4 photo paper...

Cut all the parts of the Snowman pdf and then fold all the necessary folds...

There are in total Eleven parts for the Snowman Decorative...

Make sure that you haven't missed out any part...

use the hobby knife to cut the holes marked with pink outline and also cut the necessary pink lines...

Use the images or the instructions pdf for the help...

Don't forget to cut the sharp hexagons which are needed for sticking the base and the hook to the Snowman...

Be careful while cutting the body and the hat or scarf not to cut them half...

If you have used normal a-4 size sheet then the hook needs special care...

After cutting these just go to the next step for assembly instructions...

Step 5: Snowman:Assembly...

Start assembling the snowman from it's base body....

By making the corners and edges clear and stiff...

Then make and place the middle body and stick it to the lower body with the the glue tabs inside the lower body...

And then make the head and then place it on the top and glue it in a similar way...

Now attach the base to the lower body...

And then attach 4th part to the head so that the glue tabs are on upside....

Now make the hat by using all remaining parts except part no.-11

In the part no.5 make valley folds at the bottom and mountain folds at the top for the hat....

Now stick the part4 and 6 together...

So now take the Part no-11 and make a mountain fold....

Now the place the scarf around the neck of the Snowman....

From the right side make a loop by 2 mountain folds and then just swing in the left side....to make a knot..

This completes your Snowman...

Step 6: Finish...

We have finished these now so you can decorate your Christmas tree...

or just use them on your shelves or wall racks for beautifying this Christmas with these cool and jingled paper crafts...

Please vote us if you like our Instructable...

Here

Merry Christmas ...Thanks

Comments

author
Lady Judy (author)2016-03-29

Hey... I like this. Maybe other time i can make this at home. Please vote me in Egg Contest 2016 ?? I hope i win that contest.. Pleasee. THANK YOUUU :)

About This Instructable

2,241views

45favorites

License:

Bio: Hello friends we are Abhay and Akshay of Meerut,India.We are twin brothers from india.We publish random instructables each fortnight.We like physical ... More »
More by Mr AbAk:Make Yourself a TV Remote Controlled Arduino Robot!Make your own Distortion Box Speaker!DIY Star Wars LightSaber ( Bi-Colored )
Add instructable to: